AQUARTZ CLEANAIR - Photo Catalyst Car Air Purification Coating with Nano Technology

[Daragh]

Introducing Nano-TiO2 Photo catalyst treatment, the next generation of car air purification technology. CleanAir is an advance high-end grade air purification coating based on the latest nano-science technology - photocatalyst. In the presence of light, active oxygen is formed and excited on the CleanAir treated surfaces to destroy all micro-sized air pollutants that land on it, including petro fumes, smog, diesel smoke, exhaust gases, industrial smoke, chemical off-gassing or VOCs from car fabric, leather and plastic materials, air toxins, cigarette odour, etc. Whether they are disturbing allergens, toxic diesel exhaust, moldy odour, or even lingering tobacco smell, CleanAir does NOT just simply destroy them but totally decompose their microscopic remnants into harmless gas and water vapour. The whole process of CleanAir photocatalytic decomposition is non-selective and green in nature. Compare to current popular yet unsafe ozone purification, ionic, or HEPA technology, photocatalyst is by far the most effective purification method available for air treatment. CleanAir durable coating requires only ONE single application to keep your car clean and purified at all time. Each application guarantees for a purification effect of up to one year. CleanAir is safe, non-toxic, pH neutral, colourless, odourless and can be applied to virtually any surface of your car interior such as headliner, seat, dashboard, side panels.


Allergy sufferers, chemical intolerant persons, smokers or any odour haters will appreciate the benefits CleanAir coating brings.


Advantages over conventional deodorizing methods:
1. Creates purified air by destroying odour molecules in the air without adding other harmful chemicals.
2.Decompose odour caused by different chemicals such as tobacco smoke, pet faeces, cleaning agents, rotten food products, etc.
3.Long-lasting air-purifying effect. Nano-TiO2 continuously purifies air for up to one year.
4.Requires little or no maintenance. Saves time and money.


- What is titanium dioxide? What is a photo catalyst? Titanium dioxide (TiO2) is an anti-microbial metal created by a process which crystallizes titanic iron ore into a nano liquid form. When exposed to UV light in the sub 400 range, TiO2 becomes a photo catalyst oxidizer (PCO) as well which creates hydroxyl radicals and superoxide ions which are two times stronger disinfectants than chlorine and 1.5 times stronger a disinfectant than ozone.

- After application, does it produce any odour? No, it does not have any odour. If applied to surfaces with for instance tobacco odours, those odours will go away.

- Does this CleanAir liquid have a shelf life? There is no shelf life. This solution should be stored in a dark, cool environment.

- After it is applied, how long does it last? The Titanium crystals in CleanAir liquid form bonds that are semi-permanent. For some materials such as carpets, mats and clothing (subjected to friction), it is recommended to re-apply the solution every six months.

- Does CleanAir liquid cause any fabric discoloration or any streaking effects on solid surfaces? CleanAir liquid can be applied to fabrics, curtains, carpets, woods, tiles, ceramics, glass, even metal and painted surfaces. If the surface is exposed to direct sunlight, do not apply to black or very dark coloured surfaces as the oxidation process can remove some pigments from surfaces. Indoor light is not strong enough to cause this oxidative reaction on fabrics and surfaces however. When spraying any surface with CleanAir liquid, it is always advisable to spray a small area first (test area) then allow to dry to make sure the solution does not react with the surface. Once you are confident that the fabric or material can safely be treated, spray the surface until it is completely moistened then wipe off with any type of microfibre to work the CleanAir liquid into the fabric or surface. Allow the area to dry completely.

- Exactly what types of odours will CleanAir liquid eliminate? It will remove virtually all and any type of odour from surfaces as treated surfaces become resistant to microorganisms, mold, bacteria, viruses, smoke, odours, etc. It removes odours from the air when a treated surface is exposed to certain light thus creating the photocatalytic oxidative superoxide ion and hydroxyl effect.

- Does CleanAir liquid get rid of cigarette odours from tar and nicotine that have penetrated surfaces? Yes. If a second hand smoke contaminated surface (second hand smoke is known to have over 400 known cancer causing chemicals) is treated with TiO2 PCO Solution, the odour will soon disappear. However, the discoloration caused by second hand smoke does not disappear. It is therefore advisable to first wash smoke contaminated surfaces that show discoloration before treatment.

- How does the intensity of light effect the ability of this Nano TiO2 liquid to create friendly oxidizers which purify the air? As a characteristic of titanium dioxide, it starts to produce friendly oxidizer en mass when exposed to ultraviolet rays of 400nm range or lower. It is affected more by the intensity of the ultraviolet rays rather than the intensity of light itself. However, any air pollution, VOC, or odour that comes into contact with a surface treated with CleanAir liquid will become oxidized.

- What are some of the more popular applications for CleanAir liquid? Bathrooms, floor tiles, sinks, showers, car interiors, to remove and prevent tobacco odours, kitchen counters, furniture and carpets (especially if you have pets), curtains, mini-blinds, windows exposed to light, ceiling fans, car rims, white outdoor furniture, house gutters (keep them mold free), concrete or brickwork that you wish to keep mold free, the list goes on and on.


***